Local language pages

The SRG Snap Tight Regulator to be connected to the SRG snap tight cylinder valve reduces the high gas pressure in the cylinder to the low service pressure (Single stage regulation).
No external interference which can affect the regulating mechanism thanks to the after assembly sealed body and cover.

The regulator can be equipped with a flow limiter that cuts off the gas flow at around 1500 l air/hr under normal cylinder pressure. After cut-off, the gas escape is limited to maximum 35 l air/hr.

Regulator inlet with additional shut-off valve for extra safety.
Regulators can be supplied with a reinforced diaphragm.
No tools are required to connect the regulator to the valve.
Key advantages
  • Snap-tight connection lever permits simple connection and can be switched on only when properly connected
  • 1 kg/hr capacity
  • No tools required to connect regulator to the valve
  • Regulator inlet with additional shut off valve for additional safety
  • Sealed after assembly to prevent access to regulating mechanism
Inlet27 mm, EN15202  
OutletNozzle 8, for hose with 8 mm inner diameter, to EN 16129
Nozzle 10, for hose with 10 mm inner diameter, to EN 16129
Other outlet connections available on request
outlet-pressure-28 mbar
30 mbar
Other settings available on request
Other colors available on request
Connect with an Expert

This site uses cookies.

Rotarex uses cookies to ensure a better and easier online experience. Please click here to accept the continued use of these cookies after reading our revised COOKIES POLICY.

Please note, you may continue to use the website even if you do not accept the use of cookies. However, the visitor experience on subsequent visits will be diminished.

Read the full COOKIES POLICY.

Refuse all non essential cookies