Local language pages

The SRG Mini Jumbo Regulator when combined with the SRG cylinder valve, effectively decreases the elevated gas pressure within the cylinder to achieve the necessary lower service pressure.
The regulator can be equipped with a pressure relief valve in the low-pressure stage, opening at a normal pressure of 150 mbar.

Incorporating a flow limiter, the regulator is designed to automatically halt gas flow at around 1500 liters of air per hour (under standard cylinder pressure) should a gas tubing rupture or if the tubing is inadvertently detached.
Subsequent to the cut-off, gas escape is then confined to a maximum of 35 liters of air per hour.
The regulator can be equipped with a pressure relief valve in the low-pressure stage, opening at a nominal pressure of 150 mbar.
Key advantages
  • Double stage design ensures exceptionally stable flow
  • 2.0 kg/hr capacity
  • No tools required to connect regulator to the valve
  • Sealed after assembly to prevent access to regulating mechanism
  • Can be supplied with a flow limiter which cuts off gas flow in case of a ruptured or pulled-off tube.
Inlet16 mm to EN 15202  
OutletNozzle 8, for hose with 8 mm inner diameter, to EN 16129
Nozzle 10, for hose with 10 mm inner diameter, to EN 16129
Other outlet connections available on request
Outlet Pressure28 mbar
30 mbar
37 mbar
Other settings available on request
Blue grey
Other colors available on request
Connect with an Expert

This site uses cookies.

Rotarex uses cookies to ensure a better and easier online experience. Please click here to accept the continued use of these cookies after reading our revised COOKIES POLICY.

Please note, you may continue to use the website even if you do not accept the use of cookies. However, the visitor experience on subsequent visits will be diminished.

Read the full COOKIES POLICY.

Refuse all non essential cookies