Connect with an Expert
DIMES Camping US - 487-013-2001
DIMES Camping Propane Gas Level Gauge
Keep the control of your gas bottle at all times with our remote monitoring for refillable tank bottles. Thanks to the DIMES app, you will have a constant overview and display of the remaining amount of gas, no matter where you are.
Check the level of the gas bottle at any time via your smartphone
Automatic signal of a low level
Complete the assembly of the unit in 4 simple steps
Suitable for original Rotarex Type 488 Multivalves
More time for you and your loved ones
Keep an eye on your gas consumption at any time
Two customizable alarms
Push notifications when running low on gas and prediction for the next refill
Easy and Fast Installation
Remove the dial with a flathead screwdriver
Remove the dial by gently pulling it
If you have the standard dial (see picture), you do not need the snap-on adapter. Please skip step 4 and continue with step 5
Add the base of the new dial by pushing it on
Add the new dial
Secure the dial with the two screws provided
Remove the black end cap by pulling it outwards
Route and secure the cable from the DIMES module to the dial and connect it
If needed, remove the module by pressing in the tab of the connector with a small flathead screwdriver
Stick one side of the hook and loop tape to the holder of the DIMES module and put some pressure on it for 30 seconds
Stick the other side of the hook and loop tape to the previously stuck counterpart. Add it to a clean, flat surface on the tank and put some pressure on it for 30 seconds
Reconnect everything
Set up your app and let's go
Register and create your account
Add your device (The 4-digit PIN code is at the back of the DIMES module, click here to see where it is located)
Search for your device
Setup your device
Monitor your tank status
Set your alarm level
Recording of the consumption
FAQ
Why do I have to register and be logged in for the app to display data?
The data is not stored locally on your phone, but on a central cloud server. This allows you to change your device without losing the data. To be able to assign the data, we need user accounts.
What are the GPS data needed for?
The DIMES product range also includes a solution for stationary cylinders (heating). In order to be able to offer relevant services (e.g. automatic filling), the data must be evaluated (customer, location, filling level). Furthermore, we plan to include all available LPG filling stations in a later version of the app. So you will be able to find the nearest filling station directly in the app.
Why does my tracking service have to be activated?
The providers Apple and Android do not allow bluetooth connection if tracking services are disabled.
What data is collected and what happens to it?
The data will be sent exclusively to us (ROTAREX S.A.). You can find further information at https://clone.rotarex.com/privacy-policy-SRG-DIMES-App
I am asked for a PIN when configuring the app. Where is it located?
The PIN is located on the sticker on the back of the module.
Can I measure the level with the DIMES even without an internet connection?
The readout of the current fill level is also possible without an Internet connection. Only the charts/curves are built via the cloud server.
The app shows me an incorrect fill level.
If the app displays REFILL (empty) although you knowingly have a full gas cylinder (or generally get a wrong display), this may be due to the special feature of the "first alignment" of the sensor. Since it is a mechanical level sensor that transmits the level from the valve to the display unit via a magnetic connection, under special circumstances the two magnets may "jam" together. Only by moving the float the magnets will be correctly aligned (by gas extraction and/or by vibrations while driving). Alternatively, the magnet in the sensor can be influenced by an external magnet so that it is manually released. Therefore the app should already be set up and tested during the installation before the sensor is screwed together (in this case the sensor can be adjusted again manually via an external magnet. Unfortunately, this problem is due to the design and cannot be solved by design. The problem exists only once - once the system is aligned, this problem will not reappear. This could have caused an incorrect value during your first measurements (which is why the level seems to have increased).
The plug cannot be removed from the sensor.
The plug connection is designed according to protection class IP54, which requires a good and safe connection. To release the connection, it is best to use a small (slotted) screwdriver, with which you press in the latch directly above the plug connection to be able to pull the plug upwards.
Can several devices be connected simultaneously?
The DIMES sending unit can only establish one connection at a time, but they can connect several devices (only not parallel). This situation is due to the Bluetooth Low Energy (BLE) standard.
How often is the data updated?
The default frequency is 12 hours, under ANDROID (Apple unfortunately does not support this function) you can set the cycle yourself (Menu - Global Settings - Advanced Settings). Please enter the value in minutes (e.g. 120 for an automatic update every 2 hours). Please also keep in mind that a shorter transmission frequency also means higher energy consumption (battery life).
The ‚register‘ Button doesn’t work.
The text on your phone is set to too large or bold. You can temporarily change the size of your textto register. After your registration, you can reactivate the settings. We’re currently working on a fix, but in the meanwhile you can solve the problem with the following steps:
SETTINGS -> Accessibility -> Display and text size Bold text (must be inactive) -> Larger text (must be OFF, or slider must be in the middle).
https://www.youtube.com/watch?v=geKQ-zl2Esc&ab_channel=RotarexGroup
SETTINGS -> Accessibility -> Display and text size Bold text (must be inactive) -> Larger text (must be OFF, or slider must be in the middle).
https://www.youtube.com/watch?v=geKQ-zl2Esc&ab_channel=RotarexGroup
How to replace the battery
Replacement of dial battery
Slide the plastic cap upwards to remove it from the dial
The plastic cap is loose
Loosen the cover from the housing using a flathead screwdriver
Remove both screws anti-clockwise
Pull the display part out of the housing
Remove the battery cover with a flathead screwdriver
Check the O-ring seal for cracks and deformation
Use a flat screwdriver to push the battery clamp outwards to release the battery. Once you have replaced the battery, reinstall the display unit in the housing in reverse order
_dLZDiw.jpg "Rotarex SRG to launch its patented new and improved version of multivalve")
