Print

DIAPHRAGM SEAL REFRIGERANT VALVES - F105 - F106 SERIES

Diaphragm seal valve for gas refrigerant / cooling applications using halocarbons.

Options are available:
  • Cap nut assembly
  • Thread for dip tube connection
  • Dip tube (PA-PVDF-BRASS
  • Refill Protection Device (RPD)
  • Colored plastic hand wheel: red, blue, green
  • Key advantages
    • Low pressure brass cylinder valve for refrigerant and cooling applications using halocarbons
    • Permanent gas tight seal
    • π marking according TPED directive
    • Tested according EN ISO 10297
    • Orifice diameter 8 mm
    Specifications
    Working pressure pmax.48 bar / 695 psi  
    Temperature range-25°C up to + 65°C  
    Seat orifice size8 mm  
    Helium leak rate at pmax.Internal: 10-3 mbarl/sec
    External: 10-3 mbarl/sec
     
    MaterialBody: brass
    Handwheel: plastic
    Seat: PA6.6
    Diaphragm : stainless steel
    Dip tube: PA, PVDF, brass
     
    SafetyF105: No
    F106: Yes
     
    In- and outlet connectionsAcc. to country standards  
    Product Configurator
    Safety
    safety-set-up
    Body material
    actuation
    inlet-connection
    Outlet-type
    Outlet connection
    Dip tube
    Working pressure
    Gas
    5
    Without
    0
    Without
    L
    Brass
    A
    Handwheel - standard
    25E
    25E EN ISO 11363
    0
    Single outlet (Without RPD)
    180
    DIN 477-1 Nr 6 / RPD
    0
    Without
    45
    45 bar
    R
    Refrigerant
    * RPD = Refilling Protection Device
    Connect with an Expert
    ×
    Loading